RESUMO Objetivo: Avaliar a atuação odontológica em unidades de terapia intensiva. Métodos: Estudo observacional de enquete, por meio do envio de questionários via plataforma on-line de colaboração de pesquisa em terapia intensiva no Brasil (AMIBnet). A pesquisa foi realizada de junho a outubro de 2017. Os questionários, envolvendo 26 questões fechadas sobre os hospitais e a atuação odontológica nas unidades de terapia intensiva foram enviados para 4.569 profissionais de diversas especialidades atuantes nas unidades. Resultados: Obtivemos 203 questionários respondidos, resultando em uma taxa de resposta de 4,44%. A maior parte das respostas teve origem em unidades de terapia intensiva na Região Sudeste do país (46,8%). Hospitais públicos (37,9%) e privados (36,4%) tiveram participação semelhante nos resultados. Dos respondentes, 55% apontaram que um serviço de Odontologia à beira de leito estava presente, sendo prestado de maneiras diversas. Conclusão: Presença de Serviço de Odontologia e de treinamentos e protocolos de prestação de serviço em saúde bucal estiveram correlacionados. Os métodos de cuidados orais variaram sobremaneira entre as em unidades de terapia intensiva pesquisadas.

ABSTRACT Objective: To evaluate the practice of dentistry in intensive care units. Methods: An observational survey study was conducted in which questionnaires were sent via the online platform for collaboration in intensive care research in Brazil (AMIBnet). The study was carried out from June to October 2017. The questionnaires, which contained 26 closed questions about hospitals and dentistry practices in the intensive care units, were sent to 4,569 professionals from different specialties practicing in the units. Results: In total, 203 questionnaires were returned, resulting in a response rate of 4.44%. Most of the responses were from intensive care units in the Southeast region of the country (46.8%). Public hospitals (37.9%) and private hospitals (36.4%) had similar participation rates. Of the respondents, 55% indicated that a bedside dentistry service was present, and they were provided in different ways. Conclusion: The presence of dentistry services and oral health service delivery training and protocols were correlated. The oral care methods varied greatly among the intensive care units surveyed.

Resumo Os cuidados com a saúde bucal são de fundamental importância para a preservação da integridade do indivíduo e, consequentemente, refletem na saúde geral. Este estudo transversal, observacional e analítico avaliou a situação bucal de 129 alunos com deficiência intelectual matriculados na Associação de Pais e Amigos dos Excepcionais (APAE) de três municípios do sul do Brasil. Cárie dentária (índices CPO-D e ceo-d) e doença periodontal (índice PSR) foram avaliados considerando o nível de deficiência intelectual. Um questionário das condições socioeconômicas (renda e escolaridade) e última visita ao dentista foi respondida pelos pais/responsáveis. Os dados foram avaliados estatisticamente utilizando análise de variância (ANOVA) e teste Tukey (α=0,05). As médias no índice CPO-D foram de 2,27, 3,76 e 0,58 (p<0,05) e no índice ceo-d foram de 1,48, 1,55 e 2,75 para os alunos com deficiência leve, moderada e severa, respectivamente. Com relação ao índice PSR, 43% dos alunos apresentou gengivite sem fator de retenção (sem cálculo ou defeitos marginais), não tendo diferença estatística entre os três níveis de deficiência. Considerando a população e as limitações do estudo, observou-se que alunos com deficiência severa apresentaram índice CPO-D significativamente menor comparado com outros níveis de deficiência, provavelmente devido à higiene oral ser realizada pelos cuidadores/responsáveis.

Abstract Oral health care is fundamental to preserve the individual integrity and consequently influences the general health. This observational, cross-sectional and analytical study evaluated the oral condition of 129 intellectually disabled individuals from the Association of Parents and Friends of Exceptional Children (APAE) in three southern Brazilian cities. Dental caries (DMFT and dmft indices) and periodontal disease (PSR index) were evaluated considering the intellectual disability level. A questionnaire on socioeconomic status (income and education level) and the last visit to a dentist was answered by the subjects' parents/guardians. The data were statistically evaluated using analysis of variance (ANOVA) and Tukey test (α=0.05). The mean DMFT values were 2.27, 3.76 and 0.58 (p<0.05), and the mean dmft values were 1.48, 1.55 and 2.75, respectively for subjects with mild, moderate and severe disabilities. Regarding the PSR index, 43% of the subjects presented gingivitis without retention factor (no calculus or defective margins) with no significant differences among the three disability levels. Considering the population and the limitations of this study, the subjects presenting severe disabilities showed significantly lower mean DMFT values compared to other disability levels, probably because the caretakers are responsible for the oral hygiene of such subjects.

Risk factors associated with peri-implantitis are related to the biofilm composition around the implant and the ability of bacterial adhesion. This study evaluated the biofilm formation on different surfaces of commercially pure titanium (CP Ti) grade 4 after 12, 24, 48 and 168 hours using the microcosm technique and scanning electron microscopy (SEM). The following surface conditions were examined: S (control)- smooth and plain; B- sand-blasted with aluminum oxide; E- etched using nitric acid; and BE- the combination of J and A treatments. Statistical differences on biofilm formation (CFU/ mg) were found between the control (S) and B surfaces at the first 12 hours, which are related to the lowest (Ra = 0.21 µm) and highest (Ra = 0.62 µm) mean roughness values. At 168-hour all surfaces showed similar biofilm formation. Yet, microbial growth occurred on all surfaces, regardless of the surface treatment.

Intracanal medication in pulpectomy therapy is used between appointments with the objective of reducing pain and inflammatory processes in pulp and periapical tissues. Propolis has been known as a natural antibiotic and has been subject of medical and dental research due to its therapeutic properties such as antibiotic, analgesic and anti-inflammatory effects. OBJECTIVE: The aim was to carry out an in vivo evaluation of the periapical tissue response to propolis paste when used as an intracanal medication in the teeth of dogs after pulpectomy. MATERIAL AND METHODS: 72 dog's incisors were selected for the experiment. After biomechanical preparation the root canal was filled with a corticosteroid-antibiotic preparation, experimental propolis paste, non-medicament (negative control) or non-pulpectomy at all (positive control). The medications were left inside the root canal for 7, 14 or 28 days. At the end of the experimental period histological sections were prepared and all laboratories processes for Harris hematoxylin and eosin staining was proceeded followed by the analysis using an optical microscope. Sections were classified according to a score representing the inflammatory events observed: the presence of polymorphonuclear neutrophils, polymorphonuclear eosinophils, lymphocytes and plasma cells, macrophages and/or giant cells, fibrous condensation and abscesses. RESULTS: There were statistically significant differences between the tissue reactions caused by the two substances being tested, after different experimental periods, with the periapical tissue that was in contact with propolis paste exhibiting fewer inflammatory reactions in comparison to corticosteroid-antibiotic preparation. CONCLUSIONS: The low tissue responses from propolis paste suggest that this material could be considered as an option for root canal medication after pulpectomy.

OBJECTIVE: The objective of this work was to evaluate, using radiographic images, the behavior of four materials used to repair root perforations in dogs' teeth. Material and METHODS: Second and third premolars of 6 dogs were used. The 48 teeth were randomly divided into 4 groups (n=12) and the perforations were sealed with one of the following materials: MTA, AH Plus, Vitremer and gutta-percha. Dogs were submitted to general anesthesia, teeth were radiographed and pulp was accessed. Perforations were done, at the maximum curve of the pulp floor, sealed and the accessed coronal cavity was filled with glass ionomer cement (Vidrion R). After 90 days, the dogs were sacrificed and the last x-ray image was taken. Images were analyzed for the presence/absence of periodontal lesions at the perforation region. Data were analyzed statistically by chi-square test at 5% significance level. RESULTS: There were no statistically significant differences (p>0.05) among AH Plus, Vitremer and gutta-percha groups. MTA produced the smallest number of periodontal lesions (p<0.05). CONCLUSIONS: It may be concluded that none of the tested materials was able to preserve the integrity of the periodontal tissues in the furcation region, and the use of MTA resulted in the least formation of adjacent periodontal bone lesions revealed by the radiographic comparisons.

O objetivo deste estudo foi avaliar, in vitro, a liberação de flúor (F) de 4 materiais restauradores (3M-ESPE): KME cimento de ionômero de vidro convencional (CIV) (Ketak Molar Easymix); RX2- GIC modificado por resina (RMGIC) (Rely-X luting 2); VIT-RMGIC (Vitremer); -resina composta Z250 (controle negativo) (Filtek Z250). As amostras foram confeccionadas de acordo com as instruções do fabricante e colocadas em 10 mL de água destilada 37°C até as leituras, que foram feitas utilizando um eletrodo de íon seletivo de fluoreto de membrana líquida (Orion 710). A liberação de flúor foi avaliada a cada 6 h no primeiro dia e, diariamente durante 28 dias (d). Os resultados foram analisados estatisticamente usando ANOVA a dois critérios e teste de Tukey. A média e desvio padrão de liberação de F, valores (em ppm) foram: KME: 6 h- 0,34 ± 0,04; 24 h- 1,22 ± 0,30; 7 d- 0,29 ± 0,09; 14 d- 0,20 ± 0,04; 28 d- 0,16 ± 0,01; RL2: 6 h- 2,46 ± 0,48; 24 h- 12,33 ± 2,93; 7 d- 1,37 ± 0,38; 14 d- 0,80 ± 0,13; 28 d- 0,80 ± 0,21; VIT: 6 h- 0,98 ± 0,35; 24 h- 4,35 ± 1,22; 7 d- 0,66 ± 0,23; 14 d- 0,40 ± 0,07; 28 d- 0,39 ± 0,08; Z250: 6 h- 0,029 ± 0,001; 24 h- 0,024 ± 0,009; 7 d- 0,023 ± 0,004; 14 d- 0,025 ± 0,001; 28 d- 0,028 ± 0,001. Concluiu-se que RL2 liberou mais F do que os outros materiais em todos os períodos. A maior liberação de F ocorreu nas primeiras 24 h.

The aim of this study was to evaluate in vitro fluoride (F) release from 4 restorative materials (3M ESPE): Ketak Molar Easymix [KME - conventional glass ionomer cement (GIC)]; Rely-X luting 2 [RL2 - resin-modified GIC (RMGIC)]; Vitremer (VIT- RMGIC); and Filtek Z250 [Z250 - negative control]. Disc-shaped specimens were fabricated according to the manufacturer’s instructions and placed into 10 mL of reverse osmosis water at 37°C until the analyses were done using a liquid membrane for selective F ion electrode (Orion 710). F release was evaluated every 6 h in the first day and thereafter daily during 28 days (d). The results were analyzed statistically by two-way ANOVA and Tukey’s test (α=0.05). Mean F release and standard deviation values (in ppm) were: KME: 6 h- 0.34 ± 0.04; 24 h- 1.22 ± 0.30; 7 d- 0.29 ± 0.09; 14 d- 0.20 ± 0.04; 28 d- 0.16 ± 0.01; RL2: 6 h- 2.46 ± 0.48; 24 h-12.33 ± 2.93; 7 d- 1.37 ± 0.38; 14 d- 0.80 ± 0.13; 28 d- 0.80 ± 0.21; VIT: 6 h- 0.98 ± 0.35; 24 h- 4.35 ± 1.22; 7 d- 0.66 ± 0.23; 14 d- 0.40 ± 0.07; 28 d- 0.39 ± 0.08; Z250: 6 h- 0.029 ± 0.001; 24 h- 0.024 ± 0.009; 7 d- 0.023 ± 0.004; 14 d- 0.025 ± 0.001; 28 d- 0.028 ± 0.001. RL2 RMGIC released more F than the other materials in all periods. The greatest release of F occurred in the first 24 h.

OBJECTIVE: To evaluate the gingival marginal seal in class II composite restorations using different restorative techniques. MATERIAL AND METHODS: Class II box cavities were prepared in both proximal faces of 32 sound human third molars with gingival margins located in either enamel or dentin/cementum. Restorations were performed as follows: G1 (control): composite, conventional light curing technique; G2: composite, soft-start technique; G3: amalgam/composite association (amalcomp); and G4: resin-modified glass ionomer cement/composite, open sandwich technique. The restored specimens were thermocycled. Epoxy resin replicas were made and coated for scanning electron microscopy examination. For microleakage evaluation, teeth were coated with nail polish and immersed in dye solution. Teeth were cut in 3 slices and dye penetration was recorded (mm), digitized and analyzed with Image Tool software. Microleakage data were analyzed statistically by non-parametric Kruskal-Wallis and Mann-Whitney tests. RESULTS: Leakage in enamel was lower than in dentin (p<0.001). G2 exhibited the lowest leakage values (p<0.05) in enamel margins, with no differences between the other groups. In dentin margins, groups G1 and G2 had similar behavior and both showed less leakage (p<0.05) than groups G3 and G4. SEM micrographs revealed different marginal adaptation patterns for the different techniques and for the different substrates. CONCLUSION: The soft-start technique showed no leakage in enamel margins and produced similar values to those of the conventional (control) technique for dentin margins.

The objective of this study was to evaluate the flexural strength (σf) and hardness (H) of direct and indirect composites, testing the hypotheses that direct resin composites produce higher σf and H values than indirect composites and that these properties are positively related. Ten bar-shaped specimens (25 mm x 2 mm x 2 mm) were fabricated for each direct [D250 - Filtek Z250 (3M-Espe) and D350 - Filtek Z350 (3M-Espe)] and indirect [ISin - Sinfony (3M-Espe) and IVM - VitaVM LC (Vita Zahnfabrik)] materials, according to the manufacturer's instructions and ISO4049 specifications. The σf was tested in three-point bending using a universal testing machine (EMIC DL 2000) at a crosshead speed of 0.5 mm/min (ISO4049). Knoop hardness (H) was measured on the specimens' fragments resultant from the σf test and calculated as H = 14.2P/l², where P is the applied load (0.1 kg; dwell time = 15 s) and l is the longest diagonal of the diamond shaped indent (ASTM E384). The data were statistically analyzed using Anova and Tukey tests (α = 0.05). The mean σf and standard deviation values (MPa) and statistical grouping were: D250 - 135.4 ± 17.6a; D350 - 123.7 ± 11.1b; ISin - 98.4 ± 6.4c; IVM - 73.1 ± 4.9d. The mean H and standard deviation values (kg/mm²) and statistical grouping were: D250 - 98.12 ± 1.8a; D350 - 86.5 ± 1.9b; ISin - 28.3 ± 0.9c; IVM - 30.8 ± 1.0c. The direct composite systems examined produce higher mean σf and H values than the indirect composites, and the mean values of these properties were positively correlated (r = 0.91), confirming the study hypotheses.

This study evaluated the flexural strength (sf) and the diametral tensile strength (st) of light-cured composite resins, testing the hypothesis that there is a positive relation between these properties. Twenty specimens were fabricated for each material (Filtek Z250- 3M-Espe; AM- Amelogen, Ultradent; VE- Vit-l-escence, Ultradent; EX- Esthet-X, Dentsply/Caulk), following ISO 4049 and ANSI/ADA 27 specifications and the manufacturers’ instructions. For the st test, cylindrical shaped (4 mm x 6 mm) specimens (n = 10) were placed with their long axes perpendicular to the applied compressive load at a crosshead speed of 1.0 mm/min. The sf was measured using the 3-point bending test, in which bar shaped specimens (n = 10) were tested at a crosshead speed of 0.5 mm/min. Both tests were performed in a universal testing machine (EMIC 2000) recording the fracture load (N). Strength values (MPa) were calculated and statistically analyzed by ANOVA and Tukey (a = 0.05). The mean and standard deviation values (MPa) were Z250-45.06 ± 5.7; AM-35.61 ± 5.4; VE-34.45 ± 7.8; and EX-42.87 ± 6.6 for st; and Z250-126.52 ± 3.3; AM-87.75 ± 3.8; VE-104.66 ± 4.4; and EX-119.48 ± 2.1 for sf. EX and Z250 showed higher st and sf values than the other materials evaluated (p < 0.05), which followed a decreasing trend of mean values. The results confirmed the study hypothesis, showing a positive relation between the material properties examined.

Esse estudo testou as hipóteses de que: 1. maior tempo de fotopolimerização (TF) produz maior dureza superficial em diferentes profundidades (0 e 3 mm) de resina composta (RC); 2. a cor escura (A3) de RC exige maior TF do que a RC clara (A1) para obter o mesmo grau de D. Foram fabricados 24 corpos-de-prova para cada cor de RC em único incremento de 3 mm (Z100), dividindo-os em 3 grupos (n=8), de acordo com os TF (400 mW/cm²) na superfície superior (S): A1-10 e A3-10: 10 s; A1-20 e A3-20: 20 s; A1-40 e A3-40: 40 s. Os corpos-de-prova foram armazenados sem luz, a 37ºC por 24 h, antes de aferir o grau de dureza nas superfícies S e inferior (I) com um durômetro. Foram realizadas 3 penetrações Vickers em cada superfície (S e I) dos corpos-de-prova (n=24). As diagonais das penetrações foram medidas e os valores de dureza calculados. ANOVA e Tukeyforam usados nas análises estatísticas (a=0,05). Ocorreram diferenças significativas entre S e I para cada combinação de cor-TF (p=0,0001) e entre os TF de mesma combinação cor-superfície (p=0,0001), exceto entre A1S20 e A1S40, confirmando a hipótese 1, mas rejeitando parcialmente a hipótese 2.

This study tested the following hypotheses: 1. increasing light irradiation time (IT) produces greater values of superficial hardness on different depths (0 and 3 mm); and 2. a dark shade composite (A3) needs longer IT than a light shade composite (A1) to produce similar hardness. Disk-shaped specimens (n=24 per shade) were fabricated using a 3-mm-thick increment of composite resin (Z100). Specimens were randomly assigned to 3 groups (n=8) according to the IT (400 mW/cm2) at the upper (U) surface: A1-10 and A3-10: 10 s; A1-20 and A3-20: 20 s; A1-40 and A3-40: 40 s. Specimens were stored in black lightproof containers at 37ºC for 24 h before indentation in a hardness tester. Three Vickers indentations were performed on the U and lower (L) surfaces of each specimen. The indent diagonals were measured and the hardness value calculated. The results were analyzed statistically by ANOVA and Tukey's test (alpha=0.05). Statistically significant differences were found between U and L surfaces of each composite shade-IT combination (p=0.0001) and among the ITs of same shade-surface combination (p=0.0001), except between groups A1-20U and A1-40U, confirming the study hypothesis 1 and partially rejecting the hypothesis 2.

Este estudo in vivo avaliou a capacidade de selamento de um cimento endodôntico resinoso (AH Plus) e um a base de óxido de zinco eugenol (Endofill), em dentes de cães, expostos ao meio bucal, por 45 e 90 dias. Foi realizado o tratamento endodôntico de 48 incisivos inferiores de 8 cães. Uma randomização estratificada determinou o tipo de cimento a ser usado em cada canal que foram tratados pela técnica de condensação lateral. Após a obturação, o excesso de material obturador, na porção cervical do canal radicular foi seccionado, restando o comprimento de 10 mm no interior do canal radicular. Os dentes foram selados, provisoriamente, com cimento de ionômero de vidro por 24 h. A seguir, o selamento coronário foi removido e os canais ficaram expostos ao meio bucal. Desta forma, delineou-se os seguintes grupos experimentais: A45- AH Plus por 45 dias; A90- AH Plus por 90 dias; E45- Endofill por 45 dias; e E90- Endofill por 90 dias (n=12). Passado o período experimental, os cães foram mortos e as mandíbulas removidas. Realizou-se a exodontia dos incisivos e as suas raízes foram impermeabilizadas com duas camadas de esmalte para unhas. Os dentes foram imersos em tinta nanquim por 96 h. Após realizou-se a diafanização dos espécimes e a infiltração de corante foi medida (em mm) com auxílio de uma lupa esteroscópica, em aumento de 10x. Os resultados foram analisados estatisticamente através da Análise de Variância de dois fatores e Teste de Comparações Múltiplas de Tukey (á = 0.05). O grupo E90 (2.03±0.94) apresentou uma infiltração média significativamente maior do que a ocorrida nos demais grupos (p<0.001). Os cimentos avaliados, nos dois períodos experimentais, não foram capazes de impedir a infiltração de corante.

This in vivo study evaluated the sealing ability of a resin-based sealer (AH Plus) and a zinc oxide-eugenol sealer (Endofill) in dogs' teeth, exposed to the oral environment for 45 and 90 days. Forty eight lower incisors from 8 dogs were endodonticaly treated. A stratified randomization determined the sealer use in each root canal. All canals were filled using the lateral condensation technique. The excess filling material at the cervical portion of the root canal was sectioned, leaving a 10-mm obturation length inside the canal. Teeth were provisionally sealed with glass ionomer cement for 24 h and the canals were exposed to the oral environment for either 45 or 90 days. Therefore, the experimental groups were as follows: A45- AH Plus for 45 days; A90- AH Plus for 90 days; E45- Endofill for 45 days; and E90- Endofill for 90 days (n=12). After the experimental period, the dogs were killed and the lower jaw was removed. The incisors were extracted and the roots were covered with two coats of nail varnish. The teeth were immersed in India ink for 96 h and submitted to diaphanization. Dye leakage (in mm) was measured using stereomicroscopy (10x magnification). The results were statistically analyzed using two-way ANOVA and Tukey test for multiple comparisons (á = 0.05). Group E90 (2.03±0.94) showed significantly higher mean leakage value than all other groups (p<0.001). None of the sealers, in both study conditions, were able to prevent dye leakage.

O objetivo deste trabalho foi avaliar o deslocamento apical produzido por diferentes instrumentos de níquel-titânio acionadas a motor testando a hipótese de que os sistemas rotatórios que usam instrumentos de níquel-titânio produzem valores médios de deslocamento apical menores que as limas manuais de aço inox. Foram utilizados 100 primeiros molares permanentes superiores, cujas raízes mesiovestibulares foram separadas e incluídas em blocos de resina autopolimerizável. Os corpos de prova foram divididos aleatoriamente em 5 grupos e os canais radiculares preparados com instrumentos de níquel-titânio: Grupo 1 - sistema Quantec 2000 (Analytic Endodontics, México); Grupo 2 - Pro-File T.0.04 (Dentsply/Maillefer, Suíça); Grupo 3 - Pro-File Série 29 T.0.04 (Dentsply Tulsa, Suíça); Grupo 4 - Pow-R T.0.02 (Moyco-Union Broach, EUA); e Grupo 5 (limas manuais) - limas manuais de aço inox Flexofile (Dentsply/Maillefer, Suíça). Todos os canais mesiovestibulares foram submetidos a um preparo cervical prévio utilizando-se instrumentos Orifice Shaper números 1, 2, 3 e 4 (Dentsply/Maillefer, Suíça). Realizada a odontometria, o restante do canal radicular foi modelado a partir dos instrumentos do menor para o maior calibre de tal ordem que o instrumento final de preparo correspondeu ao número 9 para o Quantec, número 06 para o Pro-File Série 29 e o número 35 para os demais grupos. Nos grupos de 1 a 4 foi utilizado motor elétrico com contra-ângulo de redução de 16:1 numa velocidade de 350 rpm. No grupo 5 o preparo foi realizado manualmente. A análise dos resultados (ANOVA), obtidos pela sobreposição radiográfica numa plataforma especifica, demonstraram que todos os grupos apresentaram deslocamentos apicais, sendo que o menor valor médio foi verificado no grupo 4 e os maiores valores médios foram observados nos grupos 2 e 3 (p<0,001).

The aim of this study was to evaluate the apical displacement produced by different rotary nickel-titanium instruments, testing the hypothesis that rotary systems with nickel-titanium instruments produce lower mean values of apical displacement than stainless steel hand instruments. A total of 100 maxillary permanent first molars were selected for the study. The mesiobuccal roots were sectioned at the top cervical third and embedded in blocks of self-curing resin. The specimens were randomly divided into 5 groups and the root canals were prepared using the following nickel-titanium instruments: Group 1 - Quantec system 2000 (Analytic Endodontics, Mexico); Group 2 - Pro-File T.0.04 (Dentsply/Maillefer, Switzerland); Group 3 - Pro-File Series 29 T.0.04 (Dentsply Tulsa, Switzerland); Group 4 - Pow-R T.0.02 (Moyco-Union Broach, USA). Specimens in Group 5 were prepared using stainless steel hand instruments Flexofile (Dentsply/Maillefer, Switzerland). All root canals were previously submitted to cervical preparation using Orifice Shaper instruments #1, 2, 3 and 4 (Dentsply/Maillefer, Switzerland). After odontometry, the remaining root canal was shaped employing increasingly larger instruments, so that the final instrument corresponded to Quantec #9, Pro-File Series 29 #6, and #35 for the other groups. Specimens in Groups 1 to 4 were prepared using an electric handpiece with 16:1 reduction at 350 rpm. The specimens in Group 5 were manually prepared. Apical displacement was measured and recorded by means of radiographic superimposition on a specific desk. Statistical analysis (ANOVA) of the results revealed that all groups presented apical displacements. Considering only the nickel-titanium instruments, Group 4 showed the lowest mean value while Groups 2 and 3 produced the highest mean apical displacement values (p<0.001).

Esse estudo in vivo analisou a capacidade de selamento do canal protético com dois adesivos, o Super Bonder® (Henkel Loctite Adesivos Ltda., Itapevi, SP) e o Scotchbond® Multi-Purpose (3M Dental Products, St. Paul, MN, EUA), testando a hipótese de que a aplicação desses adesivos resulta em menor infiltração de corante no material obturador remanescente. Quarenta dentes pré-molares (80 canais) de cães foram obturados pela técnica da condensação lateral usando o cimento endodôntico Sealer 26®. O canal protético foi preparado removendo-se 2/3 da obturação do canal radicular. Os canais preparados foram distribuídos, aleatoriamente, em três grupos: no grupo A, foi realizado o selamento do canal protético com o adesivo dentinário; no grupo B, esta impermeabilização foi realizada com o Super Bonder®; e no grupo C, controle, não foi aplicado qualquer material às paredes do canal protético. Os dentes foram selados, provisoriamente, com cimento de ionômero de vidro por 72 horas, objetivando a presa do cimento endodôntico. Removido o selamento coronário, os canais ficaram expostos ao meio bucal por 45 dias, quando os cães foram mortos e os maxilares removidos. Tinta nanquim foi colocada no canal protético e os dentes foram selados por 96 horas. Depois de extraídos, os dentes foram seccionados na região da furca e cada raiz alocada em seu respectivo grupo. Feita a diafanização, foi realizada a análise quantitativa da infiltração do corante com lupa esteroscópica. Os resultados mostraram não haver diferenças entre os três grupos experimentais, negando a hipótese inicial. Houve infiltração do corante no remanescente obturador de todas as raízes analisadas.

This in vivo study analyzed the sealing ability of two adhesives in post spaces, cyanoacrylate (Super Bonder® - Henkel Loctite Adesivos Ltda., Itapevi, SP, Brazil) and ScotchbondTM Multi-Purpose (3M Dental Products, St. Paul, MN, USA), testing the hypothesis that their use would result in a decreased leakage through the remaining filling material. Forty extracted premolars (80 root canals) of dogs were used. The root canals were cleaned, shaped and filled by the lateral condensation technique using Sealer 26TM. The post space was created removing two thirds of the filling material within the root canal. The canals were randomly divided in three groups, which were treated as follows: Group A received the ScotchbondTM Multi-Purpose adhesive system; for Group B the cyanoacrylate adhesive, Super BonderTM, was employed; and no adhesive was applied into the post space for Group C (control group). A glass ionomer provisional restoration was placed allowing the sealer to set for 72 hours. Then the restoration was removed and the root canal was exposed to the oral environment for 45 days. The dogs were then killed and their jaws were removed. The post spaces were filled with India ink and the teeth were restored for 96 hours. Afterwards, the teeth were extracted and the roots were sectioned at the furcation for allocation to their specific groups. The teeth were turned transparent and the quantitative analysis of leakage was performed using light microscopy. The results showed no significant differences between groups, rejecting the initial hypothesis. Leakage occurred in a great extent in all specimens. Therefore, sealing post spaces with the adhesives used in this study was not an effective method to prevent microleakage.